Motorola WiNG 4.4, Reference Manual

Page: 152 / 598

4 - 48 WiNG 4.4 Switch System Reference Guide
2. Select an existing WLAN from those displayed within the Configuration tab.
3. Click the Edit button.
4. Select either the EAP 802.1x, Hotspot, or Dynamic MAC ACL button from within the Authentication field. This
enables the Radius Config... button at the bottom of the Network > Wireless LANs > Edit screen.
5. Select the Radius Config... button. The Radius Configuration screen displays for defining an external Radius or NAC
Server.
The Radius Configuration screen contains tabs for defining both the Radius and NAC server settings. For NAC
overview and configuration information, see Configuring NAC Server Support on page 4-50 .
6. Refer to the Server field and define the following credentials for a primary and secondary Radius server.
RADIUS Server
Address Enter the IP address of the primary and secondary server acting as the Radius user
authentication data source.
RADIUS Port Enter the TCP/IP port number for the primary and secondary server acting as the Radius
user authentication data source. The default port is 1812.
RADIUS Shared
Secret Provide a shared secret (password) for user credential authentication with the primary or
secondary Radius server.
Server Timeout Enter a value (between 1 and 300 seconds) to indicate the number of elapsed seconds
causing the switch to time out on a request to the primary or secondary server.
Server Retries Enter a value between 1 and 100 to indicate the number of times the switch attempts to
reach the primary or secondary Radius server before giving up.