Motorola WiNG 4.4 Reference Manual Download Page 224

Page: 224 / 598

4 - 120 WiNG 4.4 Switch System Reference Guide

3. Select a radio from the table and click the

Edit

button.

The radio settings are divided into the following three sections:

• Properties

• Radio Rescuer Settings

• Advanced Properties

4. The

Properties

section displays the following information:

Description

Displays a description of the Radio. Modify the description as required to name the radio by
its intended coverage area or function.

MAC Address

Displays the Media Access Control (MAC) Address of the selected AP.

AP Name

Displays the name assigned to the AP. The AP name can be configured on the Access Port
Radios Configuration page.

AP Type

Displays the type of Access Port detected. The switches support Motorola Solutions AP 100,

AP300 and AP650 model Access Ports and AP-4131, AP-5131 and AP-7131 model

Access Points.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Motorola WiNG 4.4, Reference Manual, Page: 224 / 598

Search results

Summary of Contents for WiNG 4.4

Reviews: