manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 113 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 113

Network Setup

4 - 9

4.3 Viewing and Configuring Layer 2 Virtual LANs

A virtual LAN (VLAN) is similar to a Local Area Network (LAN), however devices do not need to be connected to the same 
segment physically. Devices operate as if connected to the same LAN, but could be connected at different physical 
connections across the LAN segment. The VLAN can be connected at various physical points but react as if it were 
connected directly. One of the biggest advantages of a VLAN is, when a computer is physically moved to another location, 
it can stay on the same VLAN without reconfiguration. The switch can support multiple VLANs. Use the 

Layer 2 Virtual 

LANs

 screen to view and configure 

VLANs by Port 

and 

Ports by VLAN 

information. Refer to the following VLAN 

configuration activities:

•

Viewing and Configuring VLANs by Port on page 4-9

•

Viewing and Configuring Ports by VLAN on page 4-11

4.3.1 Viewing and Configuring VLANs by Port

1. Select 

Network

 

>

 

Layer 2 Virtual LANs

 from the main menu tree. 

VLAN by Port

 details display within the Virtual 

LANs screen.

2. Refer to the following details within the table: 

Name 

Displays the name of the VLAN to which the switch is currently connected.

Mode 

It can be either Access or Trunk.

•

Access

– This ethernet interface accepts packets only form the native VLANs.

•

Trunk

– The Ethernet interface allows packets from the given list of VLANs you add to 

the trunk.

Native VLAN

Displays the tag assigned to the native VLAN.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments