manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual

The Motorola WiNG 4.4 is a cutting-edge networking solution, empowering businesses with seamless connectivity. Access the comprehensive Reference Manual for the product, available for free download at manualshive.com. Experience hassle-free installation and optimization with this user-friendly manual, ensuring maximum efficiency and performance for your network infrastructure.

Share
Download
background image

6 - 90 WiNG 4.4 Switch System Reference Guide

6.8 Configuring the Radius Server

Remote Authentication Dial-In User Service

 (Radius) is a client/server protocol and software enabling remote access 

servers to communicate with the switch to authenticate users and authorize their access to the switch managed network. 
For an overview on the switch’s Radius deployment, see 

Radius Overview on page 6-90

.

Setting up Radius on the switch entails the following configuration activities:

•

Defining the Radius Configuration

•

Configuring Radius Authentication and Accounting

•

Configuring Radius Users

•

Configuring Radius User Groups

•

Viewing Radius Accounting Logs

 

6.8.1 Radius Overview

Radius enables centralized management of switch authentication data (usernames and passwords). When a MU attempts 
to associate to the Radius supported switch, the switch sends the authentication request to the Radius server. The 
communications between the switch and server are authenticated and encrypted through the use of a shared secret 
password (not transmitted over the network).

The switch’s local Radius server stores the authentication data locally, but can also be configured to use a remote user 
database. A Radius server as the centralized authentication server is an excellent choice for performing accounting. Radius 
can significantly increase security by centralizing password management. 

 

The Radius server defines authentication and authorization schemes for granting the access to wireless clients. Radius is 
also used for authenticating hotspot and remote VPN Xauth. The switch can be configured to use 802.1x EAP for 
authenticating wireless clients with a Radius server. The following EAP authentication types are supported by the switch’s 
onboard Radius server:

• TLS

• TLS and MD5

• TTLS and PAP

• TTLS and MSCHAPv2

• PEAP and GTC

• PEAP and MSCHAPv2

NOTE: 

For hotspot deployment, Motorola Solutions recommends using the switch’s 

onboard Radius server and built-in user database. This is the easiest setup option and 
offers a high degree of security and accountability.

NOTE: 

The switch can be configured to use its own local Radius server or an external 

Radius server you define and configure. For information on the benefits and risks of using 
the switch’s resident Radius Server (as opposed to an external Radius Server), see 

Using the Switch’s Radius Server Versus an External Radius on page 6-92

.

CAUTION: 

When restarting or rebooting the switch, the Radius server is restarted 

regardless of its state before the reboot.

!

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 4.4

IBM TotalStorage 3534-F08 Installation And User Manual preview
TotalStorage 3534-F08
Brand: IBM Pages: 105
IBM RedBooks SAN24B-5 Product Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 11
IBM RedBooks SAN24B-5 Quick Start Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 2
IBM F16 User Manual preview
F16
Brand: IBM Pages: 123
IBM 8265 Nways ATM Switch User Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 192
Raritan PARAGON II Series Quick Manual preview
PARAGON II Series
Brand: Raritan Pages: 1
Raritan Paragon Manager Installation And Operation Manual preview
Paragon Manager
Brand: Raritan Pages: 117
Ubiquiti ES-24-250W Quick Start Manual preview
ES-24-250W
Brand: Ubiquiti Pages: 24
Ubiquiti USW-24 User Manual preview
USW-24
Brand: Ubiquiti Pages: 13
Ubisys ZIGBEE S2(-R) Quick Start Manual preview
ZIGBEE S2(-R)
Brand: Ubisys Pages: 2
I-Tech M118 User Manual preview
M118
Brand: I-Tech Pages: 27
Movie Vision VCS-3 Installation And User Manual preview
VCS-3
Brand: Movie Vision Pages: 2
SMC Networks SMC8724-10BT Technical Specifications preview
SMC8724-10BT
Brand: SMC Networks Pages: 2
Omega Engineering PSW32 SERIES User Manual preview
PSW32 SERIES
Brand: Omega Engineering Pages: 8
BERNSTEIN KFM Operating Instructions preview
KFM
Brand: BERNSTEIN Pages: 3
VADA FLOW BOSS VFB-DSU Installation Manual preview
FLOW BOSS VFB-DSU
Brand: VADA Pages: 17
Eaton AGswitch Instructions Manual preview
AGswitch
Brand: Eaton Pages: 36
Flamingo SF500WD Quick Start Manual preview
SF500WD
Brand: Flamingo Pages: 2

Brands by name

Popular brands

Load more brands