Motorola WiNG 4.4, Reference Manual

Page: 246 / 598

4 - 142 WiNG 4.4 Switch System Reference Guide
3. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
4.9.3 Access Port Configuration
Use the Configuration tab to view information on all known Access Ports and edit their profiles.
To view existing adopted Access Port information:
1. Select Network > Access Port from the main menu tree.
2. Click the Configuration tab.
3. Refer to the Configuration screen for the following information:
CAUTION: An Access Port is required to have a DHCP provided IP address before
attempting layer 3 adoption, otherwise it will not work. Additionally, the Access Port must
be able to find the IP addresses of the switches on the network. To locate switch IP
addresses on the network:
• Configure DHCP option 189 to specify each switch IP address.
• Configure a DNS Server to resolve an existing name into the IP of the switch. The Access
Port has to get DNS server information as part of its DHCP information. The default DNS
name requested by an AP300 is “Symbol-CAPWAP-Address”. Similarly, The default DNS
name requested by an AP650 is “WISPE_ADDRESS”. However, since the default name is
configurable, it can be set as a factory default to whatever value is needed.
MAC Address Displays the radio's first MAC address when it is adopted by the switch.
AP Type Displays the Access Port type.
Country Displays the country the Access Port is configured to operate in.
Ip Filter List Displays the list of IP filters assigned to this AP.
!