Motorola WiNG 4.4, Reference Manual

Page: 149 / 598

Network Setup 4 - 45
4. Select the Hotspot button from within the Authentication field.
Ensure Advanced is selected from within the This WLAN’s Web Pages are of the drop-down menu.
Once the properties of the advanced hotspot have been defined, the file can be installed on the switch and used to support
the hotspot. The following parameters are required to upload the file:
a. Specify a source hotspot configuration file. The file used at startup automatically displays within the File
parameter.
b. Refer to the Using drop-down menu to configure whether the hotspot file transfer is conducted using FTP or TFTP.
c. Enter the IP Address of the server or system receiving the source hotspot configuration. Ensure that the IP address
is valid or risk jeopardizing the success of the file transfer.
d. If using FTP, enter the User ID credentials required to transfer the configuration file from an FTP server.
e. If using FTP, enter the Password required to send the configuration file from an FTP server.
f. Specify the appropriate Path name to the hotspot configuration on the local system disk or server.
g. Once the location and settings for the advanced hotspot configuration have been defined, click the Install button
to use the hotspot configuration with the switch.
5. Refer to the
Allow List
field, and enter any IP address (for internal or external Web sites) that may be accessed by the
Hotspot user without authentication.
6. Check the Use System Name in Hotspot URL to use the System Name specified on the main Switch configuration
screen as part of the hotspot address.