manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 159 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 159

Network Setup 4 - 55

5. Specify a 4 to 32 character 

Pass Key

 and click the

 Generate 

button. 

The pass key can be any alphanumeric string. The switch and Motorola 

Solutions 

MUs use the algorithm to convert an 

ASCII string to the same hexadecimal number. MUs without Motorola 

Solutions 

adapters need to use WEP keys 

manually configured as hexadecimal numbers.

6. Use the 

Key #1-4 

areas to specify key numbers.

The key can be either a hexadecimal or ASCII. The keys are 26 hexadecimal characters in length or 13 ASCII characters. 
Select one of these keys for activation by clicking its radio button.

Default (hexadecimal) keys for WEP 128 and KeyGuard include: 

7. If you feel it necessary to restore the WEP algorithm back to its default settings, click the 

Restore Default WEP Keys

 

button. This may be the case if you feel that the latest defined WEP algorithm has been compromised and no longer 
provides its former measure of data security.

8. Refer to the 

Status

 field for the current state of the requests made from applet. This field displays error messages if 

something goes wrong in the transaction between the applet and the switch.

9. Click 

OK 

to use the changes to the running configuration and close the dialog.

10.Click 

Cancel

 to close the dialog without committing updates to the running configuration.

Key 1

101112131415161718191A1B1C

Key 2

202122232425262728292A2B2C

Key 3

303132333435363738393A3B3C

Key 4

404142434445464748494A4B4C

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments