manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 268 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 268

4 - 164 WiNG 4.4 Switch System Reference Guide

4.11.2 IGMP Snoop Querier Configuration

Use the

 IGMP Snoop Querier Config 

tab to view and configure IGMP Snoop Querier Configuration.

The IGMP Snoop Querier is used to keep host memberships alive. It is primarily used in a network where there is a 
Multicast Streaming Server and hosts that subscribe to the Multicast server and there is no IGMP Querier present. The 
switch can perform the role of an IGMP Querier. An IGMP Querier sends out periodic IGMP Query packets. Interested hosts 
reply with IGMP Report packet. IGMP Snooping is only done on wireless portals. IGMP Multicast packets are flooded on 
wired ports.

To view and configure IGMP Snoop Querier Configuration details:

1. Select 

Network 

>

 IGMP Snooping

 from the main menu tree.

2. Select the 

IGMP Snoop Querier Config 

tab

The 

IGMP Snoop Querier Config 

tab displays the following information:

 

Max Response Time

Specifies the maximum allowed time before sending a responding report. When no reports are received 
from a portal, that portal information is removed from the Snooping Table. The switch will only forward 
Multicast Packets to portals that are present in the Snooping Table. For IGMP reports from wired ports, 
the switch forwards these reports to the Multicast Router Ports. 

Version

Sets the IGMP version compatibility. Select from IGMP v1, v2, or v3.

IP Address

This address is applied as the source address in the IGMP Query packet. This value is used as the default 
VLAN Querier IP address.

Present Timeout

This is the time duration after which the switch's IGMP Querier is activated. A Querier is used to 
accommodate any query loss due to a Multicast Router being down or not accessible. It is also used to 
accommodate any local network query loss. The Querier generates IGMP queries on receipt of which 
the interested hosts reply with an IGMP report. On receipt of an IGMP report, the Snooping Table on the 
switch is updated with the host's portal information. Any IGMP packet from the Multicast Server is then 
forwarded to the particular portal.

Interval

This is the common interval in seconds between two IGMP Queries generated by the IGMP Querier. This 
is valid for all VLANs.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments