Motorola WiNG 4.4 Page 372 Reference Manual Download

Page: 372 / 598

6 - 20 WiNG 4.4 Switch System Reference Guide

4. Click the

Add

button to create a new ACL WLAN association or highlight an existing association and click the

Edit

button.

5. Define a

WLAN Index

between 1 and 32.

6. Use the

IP ACL

drop-down menu to select an IP ACL for the WLAN.

7. Use the

MAC ACL

drop-down menu to select the MAC ACL for the WLAN interface.

8. Select either the

Inbound

Outbound

radio button to define which direction the ACL applies.

9. Refer to the

Status

field for the state of the requests made from applet. This field displays error messages if something

goes wrong in the transaction between the applet and the switch.

10.Click

to use the changes to the running configuration and close the dialog.

11.Click

Cancel

to close the dialog without committing updates to the running configuration.

6.4.3 Attaching an ACL Layer 2/Layer 3 Configuration

Use the

Attach-L2/L3

screen to view and assign the ACL to a physical interface or VLAN.

To attach an interface:

1. Select

Security

Wireless Firewall

from the main menu tree.

2. Click the

Security Policy

tab.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands