Motorola WiNG 4.4, Reference Manual

Page: 250 / 598

4 - 146 WiNG 4.4 Switch System Reference Guide
2. Click the Sensor tab.
3. Specify the global default VLAN ID and the Ping Interval for all sensors and click the Apply button.
4. In the Default Configuration section, give the default configuration values of the WIPS server. Unselect the Use
DHCP to obtain IP Address automatically option to assign IP address of the VLAN manually and do not want DHCP
to provide them. Selecting this disables the IP address field and the Subnet Mask field. Enter the IP Address and the
Subnet Mask of the default VLAN in the respective fields. Also enter the Gateway IP Address , Primary WIPS
Server Address , and the Secondary WIPS Server Address . The Sensor Display Table displays the following
information:
Index Displays the numerical value assigned to each sensor AP.
MAC Address Displays the Media Access Control (MAC) address for each sensor AP.
VLAN Displays the VLAN that each sensor AP is associated with.
Last Heard (sec) Displays the number of seconds since the switch last received packets from each sensor AP.
IP Address Displays the current IP address for each sensor AP.
Revert to AP Select a sensor AP from the table and click the Revert to AP button to return to convert the
AP back to a standard Access Port.