Mitsubishi Electric Melservo MR-J3-100B, Handbook

Page: 335 / 590

Part 6: Common Reference Material
6 - 58
MR-J3-_A_ MR-J4-_A_
Conversion rule
No. Name Type Target No.
Type Target
PC02 Deceleration time constant Dec - PC02 Dec - The setting value will be maintained.
PC03
S-pattern acceleration/deceleration
time constant
Dec - PC03 Dec - The setting value will be maintained.
PC04 Torque command time constant Dec - PC04 Dec - The setting value will be maintained.
PC05
Internal speed command 1
Dec - PC05 Dec - The setting value will be maintained.
Internal speed limit 1
PC06
Internal speed command 2
Dec - PC06 Dec - The setting value will be maintained.
Internal speed limit 2
PC07
Internal speed command 3
Dec - PC07 Dec - The setting value will be maintained.
Internal speed limit 3
PC08
Internal speed command 4
Dec - PC08 Dec - The setting value will be maintained.
Internal speed limit 4
PC09
Internal speed command 5
Dec - PC09 Dec - The setting value will be maintained.
Internal speed limit 5
PC10
Internal speed command 6
Dec - PC10 Dec - The setting value will be maintained.
Internal speed limit 6
PC11
Internal speed command 7
Dec - PC11 Dec - The setting value will be maintained.
Internal speed limit 7
PC12
Analog speed command maximum
speed
Dec - PC12 Dec - The setting value will be maintained.
Analog speed limit maximum speed
PC13
Analog torque command maximum
output
Dec - PC13 Dec - The setting value will be maintained.
PC14 Analog monitor 1 output Hex _ _ XX PC14 Hex _ _ XX The setting value will be maintained.
PC15 Analog monitor 2 output Hex _ _ XX PC15 Hex _ _ XX The setting value will be maintained.
PC16
Electromagnetic brake sequence
output
Dec - PC16 Dec - The setting value will be maintained.
PC17 Zero speed Dec - PC17 Dec - The setting value will be maintained.
PC18 Alarm history clear Hex _ _ _ X PC18 Hex _ _ _ X The setting value will be maintained.
PC19 Encoder output pulses selection Hex _ _ XX PC19 Hex _ _ XX The setting value will be maintained.
PC20 Station number setting Dec - PC20 Dec - The setting value will be maintained.
PC21 Communication function selection Hex _ XX_ PC21 Hex _ XX_ The setting value will be maintained.
PC22 Function selection C-1 Hex X_ _ _ PC22 Hex X_ _ _ The setting value will be maintained.
PC23 Function selection C-2 Hex
_ _ _ X
PC23 Hex
_ _ _ X The setting value will be maintained.
XX_ _ XX_ _ The setting value will be maintained.
PC24 Function selection C-3 Hex _ _ _ X PC24 Hex _ _ _ X The setting value will be maintained.
PC26 Function selection C-5 Hex _ _ _ X PC26 Hex _ _ _ X The setting value will be maintained.
PC27 Function selection C-6 Hex _ _ _ X PC27 Hex _ _ _ X The setting value will be maintained.
PC30 Acceleration time constant 2 Dec - PC30 Dec - The setting value will be maintained.
PC31 Deceleration time constant 2 Dec - PC31 Dec - The setting value will be maintained.
PC32
Command pulse multiplying factor
numerator 2
Dec - PC32 Dec -
The setting value will be maintained.
PC33
Command pulse multiplying factor
numerator 3
Dec - PC33 Dec -
The setting value will be maintained.
PC34
Command pulse multiplying factor
numerator 4
Dec - PC34 Dec -
The setting value will be maintained.
PC35 Internal torque limit 2 Dec - PC35 Dec - The setting value will be maintained.
PC36 Status display selection Hex
_ _ XX
PC36 Hex
_ _ XX
_ _1_ will be changed to _ _ 00.
Otherwise, the setting value will be
maintained.
_ X_ _ _ X_ _ The setting value will be maintained.
Hex: hexadecimal parameter; Dec: decimal parameter