Mitsubishi Electric Melservo MR-J3-100B, Handbook

Page: 137 / 590

Part 3: Review on Replacement of MR-J3-_B_ with MR-J4-_B_
3 - 40
MR-J3-_B_ MR-J4-_B_
No. Name and function
Initial
value
No. Name and function
Initial
value
PD02 For manufacturer setting
Do not change this value by any means.
0000h PD02 Input signal automatic on selection 2
_ _ _ x
(HEX)
_ _ _ x:
FLS (Upper stroke limit) selection
0: Disabled
1: Enabled 0h
_ _ x _ :
RLS (Lower stroke limit) selection
0: Disabled
1: Enabled
_ x _ _ :
For manufacturer setting
x _ _ _ :
For manufacturer setting
_ _ x _
(HEX)
For manufacturer setting 0h
_ x _ _
(HEX)
For manufacturer setting 0h
x _ _ _
(HEX)
For manufacturer setting 0h
Convert the setting value into hexadecimal as follows.
0
BIN 0: Use for an external input signal.
BIN 1: Automatic on
Initial value
BIN HEX
Signal name
0
0
0 0 0
0
0
FLS (Upper stroke limit) selection
RLS (Lower stroke limit) selection