manualshive.com logo in svg

Mitsubishi Electric Melservo MR-J3-100B, Handbook

The Mitsubishi Electric Melservo MR-J3-100B is a high-performance servo amplifier designed for precision motion control. This user-friendly product boasts advanced technology and exceptional reliability. Easily access the comprehensive handbook and user manual, available for free download at manualshive.com, providing you with all the information you need to maximize its potential.

Share
Download
background image

Part 1: Summary of MR-J3/MR-J3W Replacement 

 

1 -  5 

 
3.1.3 Changes from MR-J3 series to MR-J4 series 
 

POINT 

 

The following table summarizes the changes from MR-J3 series to MR-J4 series. 
For details, refer to the reference document/items. 
For large capacity models of 30 kW or more, Refer to "Part 5: Review on 
Replacement of MR-J3-DU_ with MR-J4-DU_"

 

 

Changes Check 

items 

Impact 

Reference 

document/items 

Servo 
amplifier 

Connector 

Connector shape, pin arrangement, signal abbreviation, 
and location are different. 

Part 2, Section 3.3 
Part 3, Section 3.4 
Part 6, Section 1.2.2 

 

Terminal block 

Terminal block shape, location, and method of drawing out 
wires are different. 

Part 6, Section 1.2.1 

 

P3, P4 terminals 

MR-J4 servo amplifier has P3 and P4 in the upstream of 
the inrush current suppression circuit. Note that the 
locations of the P1 and P terminals of MR-J3-11K_ to MR-
J3-22K_ are different.  

Part 6, Section 1.2.1 

 

Z-phase 

There is no difference caused by the replacement from the 
MR-J3 servo amplifier to the MR-J4 servo amplifier. 

Part 6, Section 1.2.7 

 

Parameter 

General-purpose interface is upward compatible, but the 
parameter needs to be changed. The parameter converter 
function of MR Configurator2 can transfer the parameter 
setting for MR-J3 to the setting for MR-J4. For SSCNET III 
interface, the MR-J3 compatibility mode is available with the 
MR-J4 series and the parameter does not need to be 
changed. 

Part 2, Section 3.5 
Part 3, Section 3.6 
Part 6, Section 2.2 
Part 6, Section 2.3 

 

Dimensions 

MR-J3 and MR-J4 have compatibility in mounting. 
Note that the positions (clearances) of mounting screws for 
the 5 kW (200 V), 3.5 kW (400 V), 11 kW, and 15 kW have 
been changed to reduce the size of external dimensions. 

Part 6, Section 2.1.1 
Part 6, Section 2.1.2 

 

Dynamic brake coasting 
distance 

The servo motor has a different dynamic brake coasting 
distance. 

Part 6, Section 1.2.3 

 

Forced stop deceleration 

For MR-J4, in the shipping status, the servo motor 
decelerates to stop during a forced stop or when an alarm 
has occurred. The stop method for MR-J4 is different from 
the method of when an emergency stop or a forced stop of 
MR-J3 is enabled. 

Part 6, Section 1.2.4 
MR-J4-_A_Servo 
Amplifier Instruction 
Manual  
MR-J4-_B_Servo 
Amplifier Instruction 
Manual 

 

Initializing time 

The time it takes to reach servo-on from power-on is 
different. 

Part 6, Section 1.2.6 

Options and 
peripheral 
equipment 

Molded-case circuit breaker 
Fuse 

Those for MR-J3 may not be usable. Select those for MR-
J4. 

Part 8, Section 4.3 

Magnetic contactor 

Those for MR-J3 may not be usable. Select those for MR-
J4. 

Part 8, Section 4.3 

 

Power factor improving AC 
reactor 

Those for MR-J3 may not be usable. FR-HAL is 
recommended. 

Part 8, Section 7.2 
Part 8, Section 7.5 
Part 8, Section 7.6 

 

Power factor improving DC 
reactor 

Those for MR-J3 may not be usable. FR-HEL is 
recommended. 

Part 8, Section 7.1 
Part 8, Section 7.3 
Part 8, Section 7.4 

 

Regenerative option 

Some regenerative options cannot be used for MR-J4. 

Part 8, Chapter 1 

 

Setup software (SETUP221E) 

Setup software (SETUP221E) cannot be used for MR-J4. 
Use MR Configurator2. 
"MR Configurator2" can also be used for MR-J4 series and 
MR-J3 series. 

Part 8, Chapter 8 

 

Battery 

Use MR-BAT6V1SET for MR-J4. 

Part 8, Chapter 5 

 

Encoder cable 

When more than 15 kW of HG-JR 1000 r/min series or 
more than 22 kW of HG-JR 1500 r/min series is used, 
setting changes are required for the following encoder 
cables. 
MR-ENECBL _ M-H-MTH 

Part 6, Section 1.2.2 
Part 8, Chapter 3 

 

Summary of Contents for Melservo MR-J3-100B















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Melservo MR-J3-100B

Randall X2 Owner'S Manual preview
X2
Brand: Randall Pages: 9
JEFF ROWLAND Capri Owner'S Manual preview
Capri
Brand: JEFF ROWLAND Pages: 27
Carson LCS-7-01 Installating And Operation Manual preview
LCS-7-01
Brand: Carson Pages: 12
Teac HA-P90SD Installation Manual preview
HA-P90SD
Brand: Teac Pages: 4
Technalogix TAV-25 Instruction Manual preview
TAV-25
Brand: Technalogix Pages: 63
NAIM NAC 112 - ISSUE 2 Manual preview
NAC 112 - ISSUE 2
Brand: NAIM Pages: 30
E&Q AVHR-5000 Installation & User Manual preview
AVHR-5000
Brand: E&Q Pages: 14
zapco ZX-series Owner'S Manual preview
ZX-series
Brand: zapco Pages: 12
Rotel Six Channel Power Amplifier RB-956AX Owner'S Manual preview
Six Channel Power Amplifier RB-956AX
Brand: Rotel Pages: 7
JBL BPX500.1 Service Manual preview
BPX500.1
Brand: JBL Pages: 31
iDataLink Maestro AR-CH4 Install Manual preview
Maestro AR-CH4
Brand: iDataLink Pages: 43
Yerasov Eddie's Higain EH-5 User Manual preview
Eddie's Higain EH-5
Brand: Yerasov Pages: 8
Harman Kardon HK6250 Tehnical Manual preview
HK6250
Brand: Harman Kardon Pages: 34
Denon AVP-A1HDCI - Ultra Reference A/V Network Streaming Preamplifier Owner'S Manual preview
AVP-A1HDCI - Ultra Reference A/V Network Streaming Preamplifier
Brand: Denon Pages: 132
RE Audio 1000.4 Owner'S Manual preview
1000.4
Brand: RE Audio Pages: 6
Omnitronic DJP-900P MK2 User Manual preview
DJP-900P MK2
Brand: Omnitronic Pages: 20
Forney 408100-00 Manual preview
408100-00
Brand: Forney Pages: 53
Beta Three BA5120 User Manual preview
BA5120
Brand: Beta Three Pages: 12

Brands by name

Popular brands

Load more brands