Mitsubishi Electric MELSEC iQ-R Series, Programming Manual

Page: 1494 / 2110

1492
15 NETWORK COMMON INSTRUCTIONS
15.1 Link Dedicated Instructions
Receiving data from the programmable controller on another
station
JP.RECV, GP.RECV
These instructions read the data received from the programmable controller of another station (for the main routine program).
■
Execution condition
Setting data
■ Description, range, data type
*1 When specifying setting data by using a label, define an array to secure enough operation area and specify an element of the array
label.
Ladder ST
ENO:=JP_RECV(EN,J,s,d1,d2);
ENO:=GP_RECV(EN,U,s,d1,d2);
FBD/LD
Instruction Execution condition
JP.RECV
GP.RECV
Operand Description Range Data type Data type (label)
(J/U) JP.RECV (J): Own station network number 1 to 239 16-bit unsigned binary ANY16
GP.RECV (U): Start I/O number (first three digits in four-digit
hexadecimal representation) of own station or own
node 00H to FEH 16-bit unsigned binary ANY16
(s) Own station start device where control data is
stored Refer to the control data. Device name ANY16
*1
(d1) Own station head device for storing the receive
data
(A continuous area for the receive data length is
required.)

Device name ANY16
*1
(d2) Device of the own station, which turns on for one
scan upon completion of the instruction.
When the instruction completes with an error,
(d2)+1 also turns on.

Bit ANYBIT_ARRAY
(Number of elements: 2)
EN Execution condition

Bit BOOL
ENO Execution result  Bit BOOL
RnCPU RnENCPU
RnSFCPU RnSFCPU RnPCPU RnPCPU
(Standard) (Safety) (Redundant) (Process)
(s) (d1) (d2) (J/U)
EN ENO
d1
d2
J/U
s