Mitsubishi Electric MELSEC iQ-R Series, Programming Manual

Page: 1786 / 2110

1784
23 High Speed Data Logger Module Instructions
23.1 File Access Instructions
Recipe read
Z(P).RCPREAD
These instructions reads device values of the specified recipe file in the SD memory card to the CPU module.
■
Execution condition
Setting data
■
Description, range, data type
*1 When specifying setting data by using a label, define an array to secure enough operation area and specify an element of the array
label.
The local device and the file register for each program are not available for setting data.
■ Applicable devices
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
Ladder ST
ENO:=Z_RCPREAD(EN,U,s,d);
ENO:=ZP_RCPREAD(EN,U,s,d);
FBD/LD
Instruction Execution condition
Z.RCPREAD
ZP.RCPREAD
Operand Description Range Data type Data type (label)
(U) Start I/O number (first three digits in four-digit hexadecimal
representation) of a module 00H to FEH String ANY16_OR_STRING_
SINGLE
(s) Start device where control data is stored Page 1785 Control data Device name ANY16
*1
(d) Device that turns on for one scan upon completion of the
instruction
When the instruction completes with an error, (d)+1 also
turns on.

Bit ANYBIT_ARRAY
(Number of elements: 2)
EN Execution condition  Bit BOOL
ENO Execution result

Bit BOOL
Operand Bit Word Double word Indirect
specification Constant Others
(U)
X, Y, M, L,
SM, F, B, SB,
FX, FY J  \  T, ST, C, D, W,
SD, SW, FD, R,
ZR, RD U  \G  , J  \  ,
U3E  \(H)G 
Z LT, LST,
LC LZ K, H E $
(U)
           
(s)
  
*2
        
(d) 
*1
 
*3
        
RnCPU RnENCPU
RnSFCPU RnSFCPU RnPCPU RnPCPU
(Standard) (Safety) (Redundant) (Process)
(U) (s) (d)
EN ENO
d U
s