Mitsubishi Electric MELSEC iQ-R Series, Programming Manual

Page: 2086 / 2110

2084
APPX
Appendix 7 List of Loop Tag Memory Areas Used by Process Control Instructions
I-PD control (SIPD), blend PI control (SBPI)
Offset Instruction
used Item Name Recommended
range Data type Set by
SIPD SBPI
+1 Shared
among the
instructions MODE Control mode 0 to FFFFH 16-bit unsigned
binary User/system User/system
+3 ALM Alarm detection 0 to FFFFH 16-bit unsigned
binary User/system User/system
+4 INH Disable alarm
detection 0 to FFFFH 16-bit unsigned
binary User/system User/system
+10
+11 S.PHPL PV Process value RH to RL Single-precision real
number System System
+12
+13 S.OUT1 MV Manipulated value -10 to 110 [%] Single-precision real
number User/system User/system
+14
+15 S.IPD/S.BPI SV Set value RL to RH Single-precision real
number User User
+16
+17 S.IPD/S.BPI DV Deviation -110 to 110 [%] Single-precision real
number System System
+18
+19 S.OUT1 MH Output upper limit
value -10 to 110 [%] Single-precision real
number User User
+20
+21 S.OUT1 ML Output lower limit
value -10 to 110 [%] Single-precision real
number User User
+22
+23 S.PHPL/
S.IPD/S.BPI RH Engineering value
upper limit -999999 to 999999 Single-precision real
number User User
+24
+25 S.PHPL/
S.IPD/S.BPI RL Engineering value
lower limit -999999 to 999999 Single-precision real
number User User
+26
+27 S.PHPL PH Upper limit alarm
value RL to RH
PL < PH Single-precision real
number User User
+28
+29 S.PHPL PL Lower limit alarm
value RL to RH
PL < PH Single-precision real
number User User
+30
+31 S.PHPL HH Upper upper limit
alarm value RL to RH
PH

HH
Single-precision real
number User User
+32
+33 S.PHPL LL Lower lower limit
alarm value RL to RH
LL

PL
Single-precision real
number User User
+38
+39 S.IN

Filter coefficient 0 to 1 Single-precision real
number User User
+40
+41 S.PHPL HS Upper/lower limit
alarm hysteresis 0 to 999999 [%] Single-precision real
number User User
+42
+43 S.PHPL CTIM Variation rate
alarm check time 0 to 999999 [s] Single-precision real
number User User
+44
+45 S.PHPL DPL Variation rate
alarm value 0 to 100 [%] Single-precision real
number User User
+46
+47 S.IPD/S.BPI CT Control cycle 0 to 999999 [s] Single-precision real
number User User
+48
+49 S.OUT1 DML Output variation
rate limit value 0 to 100 [%] Single-precision real
number User User
+50
+51 S.IPD/S.BPI DVL Deviation limit
value 0 to 100 [%] Single-precision real
number User User
+52
+53 S.IPD/S.BPI P Gain 0 to 999999 Single-precision real
number User User
+54
+55 S.IPD/S.BPI/
S.OUT1 I
*1
Integral constant 0 to 999999 [s] Single-precision real
number User User
+56
+57 S.IPD/S.BPI D/SDV Derivative
constant/DV
cumulative total D: 0 to 999999 [s] Single-precision real
number User

SDV:
-999999 to 999999 [%] Single-precision real
number  System
+58
+59 S.IPD/S.BPI GW Gap width 0 to 100 [%] Single-precision real
number User User
+60
+61 S.IPD/S.BPI GG Gap gain 0 to 999999 Single-precision real
number User User