Mitsubishi Electric MELSEC iQ-R Series, Programming Manual

Page: 1595 / 2110

17 CC-LINK IE CONTROLLER NETWORK INSTRUCTIONS
17.4 Writing Clock Data to the Programmable Controller on Another Station
1593
17
■
Applicable devices
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
■
Clock data
If the target station CPU module is system protected, writing the clock data will fail.
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B,
SB, FX, FY J  \  T, ST, C, D, W,
SD, SW, FD,
R, ZR, RD U  \G  , J  \  ,
U3E  \(H)G 
Z LT, LST,
LC LZ K, H E $ J U
(J/U) J(P).RTMWR
            
G(P).RTMWR
            
Z(P).RTMWR             
(s1) 
*1
 
*2
         
(s2)

*1
 
*2
         
(s3)

*1
 
*2
         
(s4)   
*2
         
(d) 
*1
 
*3
         
Operand: (s4)
Device Item Description Setting range Set by
+0 Change pattern Specifies the bit pattern that indicates the item of the clock data to be changed.
• 0: Not changed
• 1: Changed
b7: Year (first two digits), b6: Day of week, b5: Second, b4: Minute, b3: Hour, b2:
Day, b1: Month, b0: Year (last two digits)
0, 1 User
+1 Clock data Upper 8 bits: Year (00H to 99H: Upper two digits of the year)
Lower 8 bits: Month (01H to 12H)
The range of the 4 digits of the year is 1980 to 2079. Year: 00H to 99H
Month: 01H to 12H User
+2 Upper 8 bits: Day (01H to 31H)
Lower 8 bits: Hour (00H to 23H) Day: 01H to 31H
Hour: 00H to 23H User
+3 Upper 8 bits: Minute (00H to 59H)
Lower 8 bits: Second (00H to 59H) Minute: 00H to 59H
Second: 00H to 59H User
+4 Upper 8 bits: Year (19H and 20H: Upper two digits of the year)
Lower 8 bits: Day of the week (00H (Sun.) to 06H (Sat.))
The range of the 4 digits of the year is 1980 to 2079. Year: 19H to 20H
Day of week: 00H to 06H User
b15 b7 b0 b1 b2 b3 b4 b5 b6 b8
…
0