Mitsubishi Electric MELSEC iQ-R Series, Programming Manual

Page: 1589 / 2110

17 CC-LINK IE CONTROLLER NETWORK INSTRUCTIONS
17.3 Reading Clock Data from the Programmable Controller on Another Station
1587
17
Setting data
■
Description, range, data type
*1 If the instruction is executed with the control system CPU (03D0H) or standby system CPU (03D1H) specified, it may complete with an
error if system switching occurs in the target station (error code: 4244H, 4248H).
Retry to execute the instruction if it completed with an error due to the above error.
■
Applicable devices
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
Operand Description Range Data type Data type (label)
(J/U) J(P).RTMRD (J): Target station network number 1 to 239 16-bit unsigned binary ANY16
G(P).RTMRD (U): Start I/O number (first three digits in four-digit
hexadecimal representation) of own station or own node 00H to FEH 16-bit unsigned binary ANY16
Z(P).RTMRD (J): Target station network number 1 to 239 String ANY16_OR_STRING_
SINGLE
Z(P).RTMRD (U): Start I/O number (first three digits in four-digit
hexadecimal representation) of own station or own node 00H to FEH String ANY16_OR_STRING_
SINGLE
(s1) Own station channel (

Page 1450 Range of available
channel numbers)
1 to 8, 11 to 18 16-bit unsigned binary ANY16
(s2) Target station number 1 to 120 16-bit unsigned binary ANY16
(s3) Specify that CPU module in the target station that is to be
accessed.
• 0000H: Addressed to target station CPU (control CPU)
• 03D0H: Addressed to control system CPU
*1
• 03D1H: Addressed to standby system CPU
*1
• 03D2H: Addressed to system A CPU
• 03D3H: Addressed to system B CPU
• 03E0H: Addressed to multiple CPU No. 1
• 03E1H: Addressed to multiple CPU No. 2
• 03E2H: Addressed to multiple CPU No. 3
• 03E3H: Addressed to multiple CPU No. 4
• 03FFH: Addressed to target station CPU (control CPU)
0000H
03D0H to 03D3H
03E0H to 03E3H
03FFH 16-bit unsigned binary ANY16
(d1) Own station start device for storing the read clock data.  Device name ANY16_ARRAY
(Number of elements: 4)
(d2) Device of the own station, which turns on for one scan upon
completion of the instruction.
When the instruction completes with an error, (d2)+1 also
turns on.

Bit ANYBIT_ARRAY
(Number of elements: 2)
EN Execution condition

Bit BOOL
ENO Execution result  Bit BOOL
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B,
SB, FX, FY J  \  T, ST, C, D, W,
SD, SW, FD,
R, ZR, RD U  \G  , J  \  ,
U3E  \(H)G 
Z LT, LST,
LC LZ K, H E $ J U
(J/U) J(P).RTMRD
            
G(P).RTMRD             
Z(P).RTMRD             
(s1)

*1
 
*2
         
(s2)

*1
 
*2
         
(s3) 
*1
 
*2
         
(d1)   
*2
         
(d2)

*1
 
*3
         