Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 845 / 2870

9 ACP Measurement
Source
:SOURce:RADio:ARB:RETRigger?
Example :SOUR:RAD:ARB:RETR OFF
Notes ON: Buffered Trigger
OFF: No Retrigger
Immediate: Restart on Trigger
This is defined as an enumerated SCPI command, with ON|OFF being considered as enumerated
types rather than Boolean. This means the query will return OFF instead of 0, and ON instead of 1.
Preset ON
Range No Retrigger | Buffered Trigger | Restart on Trigger
Initial S/W Revision A.05.00
No Retrigger
Selects No Retrigger as the trigger response for single trigger type. No Retrigger sets the waveform
generator to play a waveform sequence or segment once when a trigger is received. Any triggers then
received during playback are ignored.
Key Path
Source, Modulation Setup, ARB, Trigger Type, Single
Example :SOUR:RAD:ARB:RETR OFF
Initial S/W Revision A.05.00
Buffered Trigger
Selects Buffered Trigger as the trigger response for single trigger type. Buffered Trigger sets the waveform
generator to play a waveform sequence or segment once when a trigger is received. If a trigger is received
during playback, the waveform generator plays the sequence or segment to the end, then plays the
sequence or segment once more.
Key Path
Source, Modulation Setup, ARB, Trigger Type, Single
Example :SOUR:RAD:ARB:RETR ON
Initial S/W Revision A.05.00
Restart on Trigger
Selects Restart on Trigger as the trigger response for single trigger type. Restart on Trigger sets the
waveform generator to play a waveform sequence or segment once when a trigger is received. If a trigger
is received during playback, the waveform generator resets and plays the sequence or segment from the
start.
Key Path
Source, Modulation Setup, ARB, Trigger Type, Single
Example :SOUR:RAD:ARB:RETR IMM
Initial S/W Revision A.05.00
W-CDMA & HSPA Measurement Applications Reference 845