Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 623 / 2870

8 Channel Power Measurement
Sweep/Control
RF Burst selection in the Gate Source menu
Preset –20 dBm
State Saved Saved in instrument state
Min –200 dBm
Max 100 dBm
Default Unit depends on the current selected Y-Axis unit
Backwards
Compatibility SCPI :TRIGger[:SEQuence]:FRAMe:RFBurst:LEVel:ABSolute
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.04.00
Key Path
Trigger, RF Burst
Remote Command :TRIGger[:SEQuence]:RFBurst:LEVel:TYPE ABSolute|RELative
:TRIGger[:SEQuence]:RFBurst:LEVel:TYPE?
Example TRIG:RFB:LEV:TYPE REL
sets the trigger level type of the RF burst trigger to Relative.
Preset ABSolute
State Saved Saved in instrument state
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.04.00
Trigger Slope
It is set positive to trigger on a rising edge and negative to trigger on a falling edge.
Key Path
Trigger, RF Burst
Remote Command :TRIGger[:SEQuence]:RFBurst:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:RFBurst:SLOPe?
Example TRIG:RFB:SLOP NEG
Couplings This same slope is used in the RF Burst selection for the trigger source in the Trigger menu and for
the period timer sync source (in the Trigger menu and in the Gate Source menu).
Preset POSitive
State Saved Saved in instrument state
Backwards
Compatibility SCPI :TRIGger[:SEQuence]:FRAMe:RFBurst:SLOPe
Backwards Compatibility
Notes The legacy :TRIGger[:SEQuence]:SLOPe command affects the slopes for the VID, LINE, EXT1, EXT2,
and RFB triggers.
Initial S/W Revision Prior to A.02.00
W-CDMA & HSPA Measurement Applications Reference 623