Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 1421 / 2870

11 Occupied Bandwidth Measurement
Save
This key corresponds to the Cancel selection in the dialog. It causes the current Save As request to be
cancelled. The ESC key does the same thing.
Key Path
Save, State
Mode All
Notes Brings up Save As dialog for saving a State Save Type
Initial S/W Revision Prior to A.02.00
Edit Register Names
You may enter a custom name on any of the Register keys, to help you remember what you are using that
state to save. To do this, press the Edit Register Names key, choose the register whose name you wish to
edit, and then enter the desired label using the Alpha Editor or an external PC keyboard.
The maximum number of characters that can be added is 30. In most cases, 30 characters will fit on two
lines of the key.
See "More Information" on page 1421
Key Path
Save, State
Mode All
Remote Command
:MMEMory:REGister:STATe:LABel <reg number>,”label”
:MMEMory:REGister:STATe:LABel? <reg number>
Example :MMEM:REG:STAT:LAB 1,”my label”
Notes <reg number> is an integer from 1 to 16. If the SCPI specifies an invalid register number an error
message is generated, –222,"Data out of range;Invalid register label number"
“label” is a string from 0 to 30 characters in length. If a label exceeds 30 characters, an error
message is generated, –150,“String data error;Label clipped to 30 characters”
“label” of length 0 erases the custom label and restores the default (time and date) label. E.g.:
:MMEM:REG:STAT:LAB 1,””
Dependencies N9060A–7FP or N9060B–2FP license required to edit the register names. When the feature is not
licensed, sending this command generates an error, –221,"Settings conflict;Option not available"
Preset The names are unaffected by Preset or power cycle but are set to the default label (time and date) on
a “Restore System Defaults->Misc”
Initial S/W Revision A.11.00
More Information
When you edit one of the register names, the time and date field will be replaced by the custom name.
If you delete all the characters in the custom name, it restores the default (time and date).
The register names are stored within the state files, but they are not part of the instrument state; that is,
once you have edited a register name, loading a new state will not change that register name.Another
W-CDMA & HSPA Measurement Applications Reference 1421