Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 1299 / 2870

10 Spectrum Emission Mask Measurement
Trace/Detector
LTE, LTETDD, Digital Cable TV, WLAN, MSR, LTEAFDD, LTEATDD
Remote Command [:SENSe]:SEMask:DETector:OFFSet:AUTO ON|OFF|1|0
[:SENSe]:SEMask:DETector:OFFSet:AUTO?
Example SEM:DET:OFFS:AUTO OFF
SEM:DET:OFFS:AUTO?
Notes See Couplings in the Trace Type section.
You must be in the mode that includes SEM measurement to use this command. Use
:INSTrument:SELect to set the mode.
Preset ON
State Saved Saved in instrument state.
Range On|Off
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Offset Detector Selection
Selects the detector mode for the offsets.
Key Path
Trace/Detector
Mode SA, WCDMA, C2K, WIMAX OFDMA, TD-SCDMA, 1xEVDO, DTMB (CTTB), DVB-T/H, ISDB-T, CMMB,
LTE, LTETDD, Digital Cable TV, WLAN, MSR, LTEAFDD, LTEATDD
Remote Command [:SENSe]:SEMask:DETector:OFFSet[:FUNCtion] AVERage | NEGative | NORMal
| POSitive | SAMPle
[:SENSe]:SEMask:DETector:OFFSet[:FUNCtion]?
Example SEM:DET:OFFS AVER
SEM:DET:OFFS?
Notes When you manually select a detector (instead of selecting Auto), that detector is used regardless of
other analyzer settings.
Note: This detector setting has effects all offsets. There is not a per trace detector.
You must be in the mode that includes SEM measurement to use this command. Use
:INSTrument:SELect to set the mode.
Couplings See Couplings in the Trace Type section.
Preset POSitive
State Saved Saved in instrument state.
Range Normal|Average|Peak|Sample|Negative Peak
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
W-CDMA & HSPA Measurement Applications Reference 1299