Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 314 / 2870

6 System Functions
System
Self test
This key gives you access to diagnostic capabilities for self tests of the instrument.
Key Path
System, Diagnostics
Initial S/W Revision Prior to A.10.00
All Self Test
This key invokes all the self tests defined in the Diagnostics Self Test section.
Key Path
System, Diagnostics, Self Test
Remote Command SYSTem:TEST:WCTS:[ALL]
Example SYST:TEST:WCTS:[ALL]
Initial S/W Revision A.12.50
FEC Self Test
This key invokes the EXT E6607C front end control self test. When operation is complete, the generated
test summary information is appended to log file E:\Agilent\Instrument\FECTestLog.txt. This test summary
file can be retrieved from the instrument using the MMEM set of SCPI command, once you have the fully
qualified the path and file name.
If the self test fails, the following error message will be generated:
“–330, Self-test failed, see log file E:\Agilent\Instrument\FECTestLog.txt”
If the self test passes, an advisory message “FEC self-test completed successfully” is generated.
Key Path
System, Diagnostics, Self Test
Remote Command SYSTem:TEST:WCTS:FEC
Example SYST:TEST:WCTS:FEC
Notes Access log with command :
MMEM:DATA? "E:\ Agilent\Instrument\FECTestLog.txt"
Initial S/W Revision A.12.50
Show Result
This key gives you access to show results of the following self tests:
•
Source self-test results
•
E6607C embedded MPA or E6640A/E6650A RFIO self-test results
•
E6607C FEC self-test results
314 W-CDMA & HSPA Measurement Applications Reference