Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 510 / 2870

8 Channel Power Measurement
Source
Key Path
Source, Modulation Setup, ARB, ARB Setup
Remote Command :SOURce:RADio:ARB:BASeband:FREQuency:OFFSet <freq>
:SOURce:RADio:ARB:BASeband:FREQuency:OFFSet?
Example :SOUR:RAD:ARB:BAS:FREQ:OFFS 0.00 Hz
Dependencies When a new waveform is selected for playback the settings contained within the associated
waveform header file are applied to the ARB. The baseband frequency offset is one of the values
stored within the header file. If the newly selected waveform file has an associated header file, the
baseband frequency offset is updated with the value from the header file. The baseband frequency
offset will remain unchanged if the newly selected waveform does not have an associated header file.
Preset 0.00 Hz
Min –50.00 MHz
Max 50.00 MHz
Initial S/W Revision A.05.00
Trigger Type
Allows access to the trigger type sub-menus. The setting for trigger type determines the behavior of the
waveform when it plays.
Key Path
Source, Modulation Setup, ARB
Remote Command :SOURce:RADio:ARB:TRIGger:TYPE CONTinuous | SINGle | SADVance GATE
:SOURce:RADio:ARB:TRIGger:TYPE?
Example :SOUR:RAD:ARB:TRIG:TYPE CONT
:SOUR:RAD:ARB:TRIG:TYPE?
Notes Gated trigger type will be implemented at a later release
Preset CONTinuous
Range Continuous | Single | Seg Adv | Gated
Initial S/W Revision A.05.00
Continuous
Sets the active trigger type to Continuous. If Continuous is already selected as the active trigger type,
pressing this key allows access to the continuous trigger type setup menu. In Continuous trigger mode, the
waveform repeats continuously.
Key Path
Source, Modulation Setup, ARB, Trigger Type
Remote Command :SOURce:RADio:ARB:TRIGger:TYPE:CONTinuous[:TYPE] FREE | TRIGger | RESet
:SOURce:RADio:ARB:TRIGger:TYPE:CONTinuous[:TYPE]?
Example :SOUR:RAD:ARB:TRIG:TYPE:CONT FREE
Preset FREE
510 W-CDMA & HSPA Measurement Applications Reference