Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 2735 / 2870

15 Power Control Measurement
Source
Nt = 5*F 0.0 MHz ≤ F≤ 3276.6 MHz
where F is the carrier frequency in MHz
Additional channels applicable to operation in the frequency band defined in sub-clause 5.2(d) are defined
via the following UARFCN definition:
Nt = 5 * (F – 2150.1 MHz)2572.5 MHz ≤ F≤ 2617.5 MHz
UARFCN
1.28 Mcps TDD Option
The following UARFCN range shall be supported for each band:
Table: UTRA Absolute Radio
Frequency Channel Number 1.28
Mcps TDD Option
Frequency Band Frequency Range
UARFCN Uplink and Downlink
transmission
For operation in frequency band as
defined in subclause 5.2 (a) 1900–1920 MHz
2010–2025 MHz
9504 to 9596
10054 to 10121
For operation in frequency band as
defined in subclause 5.2 (b) 1850–1910 MHz
1930–1990 MHz
9254 to 9546
9654 to 9946
For operation in frequency band as
defined in subclause 5.2 (c) 1910–1930 MHz 9554 to 9646
For operation in frequency band as
defined in subclause 5.2 (d) 2570–2620 MHz 12854 to 13096
For operation in frequency band as
defined in subclause 5.2 (e) 2300–2400 MHz 11504 to 11996
For operation in frequency band as
defined in subclause 5.2 (f) 1880–1920 MHz 9404 to 9596
Radio Setup
Allows access to the sub-menus for selecting the radio standard and associated radio band. You can also
set a frequency reference and offset.
This menu is greyed out when on E6630A. Radio band settings for GSM, cdma2000, and so on -- most of
which are not actually supported in E6630A, which has three narrow frequency bands. So band settings
are grayed out.
Key Path
Source, Frequency
Initial S/W Revision A.05.00
W-CDMA & HSPA Measurement Applications Reference 2735