Keysight E6640A, Measurement Applications User & Programmer Reference

Page: 530 / 2870

8 Channel Power Measurement
Source
Default Directory...
Allows you to change the default directory. It is used as a search location for waveform segments that are
required to be loaded into ARB memory for playback of a waveform sequence, and as a search location for
selecting waveforms using SCPI.
Key Path
Source, Modulation Setup, ARB, Select Waveform, Segments on Hard Disk
Remote Command
:SOURce:RADio:ARB:DEFault:DIRectory <string>
:SOURce:RADio:ARB: DEFault:DIRectory?
Example :SOUR:RAD:ARB:DEF:DIR “D:\ArbFiles”
:SOUR:RAD:ARB:DEF:DIR?
State Saved Persistent, survives a power cycle and a preset but not saved in the instrument state
Initial S/W Revision A.05.00
Segments on Hard Disk
This key functions the same as "Segments on Hard Disk" on page 2828 .
Key Path
Source, Modulation Setup, ARB, Waveform Utilities, Multi-Pack Licenses, Add Waveform
Initial S/W Revision Prior to A.09.00
Load Segment To ARB Memory
This key functions the same as "Load Segment To ARB Memory" on page 2828 .
Key Path
Source, Modulation Setup, ARB, Waveform Utilities, Multi-Pack Licenses, Add Waveform, Segment
on Hard Drive
Initial S/W Revision Prior to A.09.00
Load All To ARB Memory
This key functions the same as "Load All To ARB Memory" on page 2829 .
Key Path
Source, Modulation Setup, ARB, Waveform Utilities, Multi-Pack Licenses, Add Waveform, Segment
on Hard Drive
Initial S/W Revision Prior to A.09.00
Change Directory …
This key functions the same as "Change Directory..." on page 2830 .
Key Path
Source, Modulation Setup, ARB, Waveform Utilities, Multi-Pack Licenses, Add Waveform, Segment
on Hard Drive
Initial S/W Revision Prior to A.09.00
530 W-CDMA & HSPA Measurement Applications Reference