Delta ASD-B2-0121-B, User Manual

Page: 212 / 313

Chapter 7 Servo Parameters
Revision June 2010
7-59
Display Format: Decimal
Settings:
This parameter is used to set magnitude of the resonance suppression that is set
by parameter P2-43. If P2-44 is set to 0, the parameters P2-43 and P2-44 are both
disabled.
P2 - 45 NCF3 Notch Filter 3 (Resonance Suppression) Address: 025AH, 025BH
Default: 1000 Related Section:
Applicable Control Mode: ALL Section 6.3.7
Unit: Hz
Range: 50 ~ 2000
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to set third resonance frequency of mechanical system. It
can be used to suppress the resonance of mechanical system and reduce the
vibration of mechanical system.
If P2-45 is set to 0, this parameter is disabled.
P2 - 46 DPH3
Notch Filter Attenuation Rate 3
(Resonance Suppression)
Address: 025CH, 025DH
Default: 0 Related Section:
Applicable Control Mode: ALL Section 6.3.7
Unit: dB
Range: 0 ~ 32
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to set magnitude of the resonance suppression that is set
by parameter P2-45. If P2-46 is set to 0, the parameters P2-45 and P2-46 are both
disabled.
P2 - 47 ANCF
Auto Resonance Suppression Mode
Selection
Address: 025EH, 025FH
Default: 1 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 2
Data Size: 16-bit
Display Format: Decimal