Delta ASD-B2-0121-B, User Manual

Page: 169 / 313

Chapter 7 Servo Parameters
7-16
Revision June 2010
P0 - 12
★
CM4 Status Monitor 4 Address: 0018H, 0019H
Default: N/A Related Section:
Applicable Control Mode: ALL Section 4.3.5
Unit: N/A
Range: N/A
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to provide the value of one of the status monitoring
functions found in P0-02. The value of P0-12 is determined by P0-20 (desired drive
status) through communication setting or the keypad. The drive status can be read
from the communication address of this parameter via communication port.
When reading the drive status through the keypad, if P0-02 is set to 26, VAR-4 will
quickly show for about two seconds and then the value of P0-12 will display on the
display.
P0 - 13
★
CM5 Status Monitor 5 Address: 001AH, 001BH
Default: N/A Related Section:
Applicable Control Mode: ALL Section 4.3.5
Unit: N/A
Range: N/A
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to provide the value of one of the status monitoring
functions found in P0-02. The value of P0-12 is determined by P0-20 (desired drive
status) through communication setting or the keypad. The drive status can be read
from the communication address of this parameter via communication port.
P0 - 14 Reserved (Do Not Use)
P0 - 15 Reserved (Do Not Use)
P0 - 16 Reserved (Do Not Use)
P0 - 17 CM1A Status Monitor Selection 1 Address: 0022H, 0023H
Default: 0 Related Section: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 18