manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 244 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 244

Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

244 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Major tasks to upgrade the S8300B to release 4.0
and upgrade the G700 firmware

The major tasks to upgrade the S8300B to release 4.0, and upgrade the G700 firmware are:

●

Before going to the customer site

●

On-site Preparation for the Upgrade

The Upgrade Tool performs the following tasks automatically:

-

Run the Upgrade Tool to upgrade the primary controller, LSPs, and G700 media 
gateways

●

Post-upgrade tasks

Before going to the customer site

The procedures in this section should be completed before going to the customer site or before 
starting a remote installation. 

This section covers:

●

Getting information that the project manager provides

on page 245

●

Getting the serial number of the G700, if necessary

on page 245

●

Checking the number of allocated ports

on page 245

●

Checking the versions of the LSPs (if starting from R2.0 only)

on page 246

●

Checking for and FTP/SCP/SFTP Server or Compact Flash for Backing up Data

on 

page 246

●

Obtaining S8300 software and G700 firmware

on page 246

●

Obtaining service pack files

on page 247

●

Obtaining service pack and language files for IA770 INTUITY AUDIX Messaging, if 
necessary

on page 249

●

Completing the RFA process (obtaining license and password file)

on page 250

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments