manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 723 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 723

Upgrade the S8300

Issue 10.2 May 2007

723

 

Configure Ethernet Interfaces screen (primary controller example)

7. Fill in the correct server IP address, Gateway, Subnet mask, and, if IA770 was installed, the 

Integrated Messaging IP address. The Integrated Messaging IP address is not available 
with an LSP.

If these fields are already filled in, overwrite them with the correct information. Leave the 
Integrated Messaging field blank.

Click 

Change

 to update the system files.

Note:

Note:

If an 

Action Cancelled

 message appears before the success message, refresh 

the screen and click 

Change

 again.

8. When the configuration change is complete, the screen displays 

Successfully configured 

ethernet interfaces

. Click 

Close Window

.

At this point, the system resets the IP interfaces.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments