Avaya G700 Installing And Upgrading Download Page 705

Page: 705 / 808

On-site Preparation for the Upgrade

Issue 10.2 May 2007

705

Determining whether optional languages are needed

To determine the system language

1. On the Maintenance Web Interface, under Miscellaneous select

Messaging

Administration

2. Select

Global Administration;

then

Messaging Administration

3. Enter the

craft

password.

4. At the command prompt, enter

display system-parameters features

The

SYSTEM PARAMETERS FEATURES

screen displays.

5. Go to page 3.

System Parameters Features screen

6. Under

Announcement Sets

, note the main system language listed after

System:

In this

example, the main system language is English (

us-eng

). If the system language is anything

other than

us-eng

us-tdd

, you will need to download the appropriate language files from

a language CD after the upgrade. Also, if the language is a custom set, you must change
the name to

us-eng

us-tdd.

See

Checking for any IA770 custom announcement sets

page 707.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 705 / 808

Search results

Summary of Contents for G700

Reviews: