manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 579 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 579

Replacing the S8300A

Issue 10.2 May 2007

579

 

4. Select the appropriate release version (if more than one) then select 

OK

 and press 

Enter.

The 

Run AUDIX Installation

 screen appears.

Run AUDIX Installation screen

5. Select 

Yes

 if you want to install AUDIX concurrently with Communication Manager. Select 

No

 if you do not. Then press 

Enter

.

Note:

Note:

If you do not install IA770 concurrently with Communication Manager at this time, 
and decide later to install it, you will have to upgrade Communication Manager 
again (even to the same release), For the upgrade, you use the Manage 
Software screen on the Maintenance Web interface, and select 

Yes

 at this screen 

for IA770 installation.

At this point, the following processes are initiated:

a. The S8300 hard drive and internal Compact Flash are partitioned and reformatted.

b. The Linux operating system is installed.

c. The program begins installing Communication Manager software and reports the 

progress.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments