manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 280 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 280

Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

280 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Copy Complete screen

This screen indicates the release just copied, shows the release running on the S8300, and 
shows the releases resident on the server’s hard drive.

Note:

Note:

Did you experience a timeout while downloading from a TFTP or HTTP server? If 
so, you must restart the download.

!

CAUTION:

CAUTION:

At this point you are finished with copying the software to the server. If the 
software was on CD-ROM, 

remove the CD from your laptop now

 to avoid 

possible problems the next time your laptop is rebooted.

8. Repeat this procedure for each LSP you want to upgrade with the Upgrade Tool.

Obtaining additional data for running the Upgrade Tool

To run the Upgrade Tool for upgrading media gateways, you need the following from the 
customer: 

●

Logins and passwords for the media gateways, including global logins and passwords and 
individual media gateway logins and passwords.

●

IP addresses for any TFTP servers being used.

You can use the worksheets in the 

Job Aid: Upgrade Tool and Worksheets

, 555-245-757, to 

capture this information.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments