manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 155 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 155

Using the Avaya Installation Wizard (IW)

Issue 10.2 May 2007

155

 

Trunk configuration

For trunk configuration:

1. To configure the G700's trunk parameters, do one of the following:

●

From the Import Name/Number List screen, click 

Continue

, or

●

Click 

Trunking

 from the main menu.

The Cross-Connects screen appears. If your trunk cross-connects have been completed, 
click 

Continue

 to proceed with trunk configuration. If your trunk cross-connects have not 

been completed, it is strongly recommended to exit the Avaya IW and complete all 
cross-connects before proceeding with trunk configuration.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments