manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 707 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 707

On-site Preparation for the Upgrade

Issue 10.2 May 2007

707

 

3. Note the 

System Announcement

 language files listed. In this example, 

us-eng

 and 

us-tdd

 

are listed. If any language files other than these two are listed, you will need to download 
the additional language files from a language CD after the upgrade.

Checking for any IA770 custom announcement sets

When you restore announcement sets, Communication Manager looks for standard names for 
the announcement sets. Therefore, if a custom announcement set exists, check with the 
customer to ensure that the customer wants to restore it. If the set is to be restored, you must 
change the name of the set to a standard name, either 

us-eng

 or 

us-tdd

.

In this case, do the following:

1. Add a name for the standard announcements backup set, for example, us-eng-backup.

2. Copy the standard announcements from the standard set, for example us-eng, to the 

backup set.

3. Copy the announcements of the custom announcement set into the announcement set with 

the standard name.

Creating an IA770 test message for the upgrade

To test IA770 after the upgrade

1. Write down the number of a test voice mailbox, or create one if none exists. 

2. Write down the number of the IA770 hunt group. 

3. Leave a message on the test mailbox that will be retrieved after the upgrade.

Shutting down IA770

To shut down IA770

1. From the 

Maintenance Web Page

, select 

Messaging Administration

 from the 

Miscellaneous

 menu.

The 

Messaging Administration

 Web page is displayed in a new Web browser window.

2. From the 

Messaging Administration

 Web page, select 

Utilities

.

The 

Utilities

 Web page is displayed.

3. Select 

Stop Messaging Software

.

The 

Stop Messaging Software

 Web page is displayed.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments