manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 286 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 286

Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

286 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Note:

Note:

A TFTP server must be accessible over the LAN from the gateway you are 
upgrading. 

3. Click 

Schedule

 to set up the upgrade schedule or 

Run Now

 to run the upgrades 

immediately.

Viewing the status of the upgrade in progress

To review the status of an upgrade in progress, click 

View Active

. 

Note:

Note:

If you use the View Active screen while upgrading the server on which the 
Upgrade Tool itself is running, the screen displays an error while the server is 
rebooted. To view the successful status of the upgrade of the server on which the 
Upgrade Tool is running, you must use the View Prior screen after the upgrade is 
complete. 

However, the upgrade is not complete until the following events occur:

- The server reboots. 

- Additional database updates occur after the reboot.

- The upgrade is made permanent. 

Making the upgrade permanent takes at least an additional five minutes beyond the reboot. You 
can check to see when the upgrade is complete by checking the View Prior upgrade screen 
periodically or by doing the following:

1. Access the Maintenance Web pages on the server from which you started the upgrade.

2. Select 

Boot Partition

.

3. Check to see if a physical partition is identified as both the boot partition and the active 

partition, and that the physical partition contains the most recent software release.

Note:

Note:

The Upgrade Tool automatically makes the upgrade permanent.

Note:

Note:

This Web session will be interrupted by the reboot that occurs during the primary 
server upgrade. After the reboot, the links in the main menu of the Web interface 
will not function. Therefore, you must close and reopen the Web browser to 
continue with the upgrade procedure.

4. Close the Web browser.

5. Reopen the Web browser and log in.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments