Avaya G700 Installing And Upgrading Download Page 187

Page: 187 / 808

Administering an S8400, S8500, or S8700-series primary controller

Issue 10.2 May 2007

187

To define the IP interface of the S8400 or S8500 processor Ethernet port

Note:

Note:

This should have already been established as a part of normal S8400, S8500, or
S8700-series Media Server installation.

1. Type

change ip-interfaces procr

to open the

IP Interfaces

screen.

IP Interfaces Screen

2. Complete the fields as described the in

Table 9

change ip-interfaces procr Page 1 of 1

IP INTERFACES

Type: PROCR

Node Name: procr

IP Address: 135.9.41.146

Subnet Mask: 255.255.255.0

Link: 1

Enable Ethernet Port? y

Allow H.323 Endpoints? y

Nework Region: 1

Allow H.248 Gateways? y

Gatekeeper

Priority:

Target socket load:

Table 9: IP interfaces field descriptions

Field

Conditions/Comments

Type

Display only. PROCR

Node name

The unique node name for the IP interface.

procr

is the

default node name. The node name here must already
be administered on the Node Names screen.

IP Address

The IP address (on the customer LAN) of the Processor
Ethernet.

Subnet Mask

The subnet mask associated with the IP address for this
IP interface.
For more information on IP addresses and subnetting,
see “

Administration for Network Connectivity for Avaya

Communication Manager, 555-233-504”

Enable Ethernet
Port?

The Ethernet port must be enabled (

) before it can be

used. The port must be disabled (

) before changes can

be made to its attributes on this screen.

Network Region

The region number for this IP interface.

1 of 2

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 187 / 808

Search results

Summary of Contents for G700

Reviews: