manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 307 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 307

On-site preparation for the upgrade

Issue 10.2 May 2007

307

 

3. Copy the firmware files from the 

pub

 directory to the /

tftpboot

 directory, using the S8300 

Media Server command line interface.

To copy firmware files to the /tftpboot directory of an S8300 Media Server, do the following:

a. Access the server’s command line interface using an SSH client, like PuTTY, and an IP 

address of 

192.11.13.6

.

b. Log in as craft.

c. At the Linux prompt, type 

cd /var/home/ftp/pub,

 and press 

Enter

.

d. The Linux prompt reappears. The current directory has changed to /var/home/ftp/pub.

e. At the Linux prompt, type 

cp

 <

firmware_filename

> 

/tftpboot

, and press 

Enter

 to 

copy a single firmware file to the /tftpboot directory. To copy multiple firmware files (most 
firmware files have an .fdl suffix), use the command 

cp *.fdl /tftpboot

.

f. The Linux prompt reappears. The firmware file or files have been copied to the /tftpboot 

directory.

g. Repeat step 4, if necessary, for other firmware files you want to install.

h. At the Linux prompt, type 

cd

 

/tftpboot

.

i. The Linux prompt reappears. The current directory has changed to /tftpboot.

j. At the Linux prompt, type 

ls

, and press 

Enter

.

k. A list of files in the directory appears.

l. Check the directory to make sure the firmware files you want to install are listed.

Determining which firmware to install on the G700

You should check the current releases of all devices (LSPs, media gateways, and media 
modules) to verify which devices need to be upgraded. This step, while optional, can speed the 
upgrade process if you find that some devices do not require upgrades.

1. From your laptop connected to the services port on the primary controller, launch the Web 

browser. You can also launch the Web browser over a LAN connection to the primary 
controller

2. On the services port connection, type 

192.11.13.6

 in the 

Address

 field to open the 

Logon

 

page.

3. Log on as 

craft

 or 

dadmin

 when prompted.

4. Click 

Launch Maintenance Web Interface

 to get to the 

Main Menu

.

5. On the Welcome page of the Communication Manager Web pages, select 

Launch 

Upgrade Tool

.

The Upgrade Tool Welcome page appears.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments