Avaya G700 Installing And Upgrading Download Page 618

Page: 618 / 808

Manual upgrade of an S8300A and G700 to R4.0

618 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

To re-enable alarm origination

1. Telnet to the S8300 and log on.

2. At the command prompt, type

almenable -d b -s y

where

-d b

sets the dialout option to

both

(numbers)

-s y

enables SNMP alarm origination

3. Type

almenable

(without any options) to verify the alarm origination status.

To back up the system

Using the Maintenance Web Interface, back up the system as you did before the upgrade
selecting

Save Translations

and all backup sets.

To restart LSPs (if any)

To restart Communication Manager on LSPs (if any) after the upgrade:

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP

address of

192.11.13.6

2. At the command prompt, type

start -ac

and press

Enter

This completes the upgrade process for a G700 with an S8300.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 618 / 808

Search results

Summary of Contents for G700

Reviews: