Avaya G700 Installing And Upgrading Download Page 643

Page: 643 / 808

On-site Preparation for the Upgrade

Issue 10.2 May 2007

643

6. Under

Announcement Sets

, note the main system language listed after

System:

In this

example, the main system language is English (

us-eng

). If the system language is anything

other than

us-eng

us-tdd

, you will need to download the appropriate language files from

a language CD after the upgrade.

Note:

Note:

Starting with release 2.1, only English language files (

us-eng

and

us-tdd

) are

included with the Communication Manager software. Before release 2.1, Latin
American Spanish and Canadian French (

lat-span

and

french-c

) were also

included.

To determine other languages

1. On the Maintenance Web Interface, under Miscellaneous select

Messaging

Administration

2. Select

Utilities;

then

Software Management;

then

Messaging System Software Display

The

Messaging System Software Display

screen displays.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 643 / 808

Search results

Summary of Contents for G700

Reviews: