manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 434 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 434

Manual installation of a new G700 with an S8300

434 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

17. Click 

Continue

. 

The 

External DNS Server Configuration

 screen appears.

Most corporate networks have one or more domain name service (DNS) servers that 
associate an IP address with a device's name. When the DNS is administered with the 
S8300 Media Server name, you will be able to access the S8300 server by name as well as 
IP address over the corporate network.

!

CAUTION:

CAUTION:

If you configure an external DNS server, the DNS will be an extra device that, if 
not working properly, can cause delays in S8300 access.

External DNS Server Configuration Screen

18. Enter the appropriate IP addresses from your planning documentation. 

Complete the following fields:

- In the 

Name Servers

 fields, enter the IP addresses for up to 3 DNS servers on the 

corporate network. 

The S8300 Media Server checks the DNS servers in the order in which their addresses 
are entered for name-to-IP address resolution. 

- In the 

DNS Domain

 field, enter the name for the part of the network on which the DNS 

server(s) reside (for example, 

mycompany.com

). 

Internet domains are sets of addresses generally organized by location or purpose. 

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments