manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 39 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 39

What wizards are available

Issue 10.2 May 2007

39

 

Chapter 1: Roadmaps and reference information

This chapter provides guidance on how to use this book along with connection, login, and other 
reference information that you will need to perform the installation and upgrade procedures in 
later chapters.

This Chapter is organized as follows:

●

What wizards are available

●

About connection and login methods

●

About navigation for G700 CLI commands

●

About terminal emulation function keys for Communication Manager

What wizards are available

To save time on installations and upgrades, four distinct tools are available for your use:

●

Avaya Installation Wizard

See 

Job Aid: Avaya Installation Wizard, 

555-245-754.

●

Gateway Installation Wizard

See 

Job Aid: Avaya Gateway Installation Wizard, 

555-245-756.

●

Upgrade Tool

See 

Job Aid: Upgrade Tool and Worksheets, 

555-245-757.

●

Software Update Manager

See 

Avaya Software Update Manager User Guide, 

14-300168.

Note:

Note:

These tools replace many normal installation or upgrade procedures described in 
this document. However, they do not automate all of the tasks associated with an 
installation or an upgrade. Where a task or tasks must be performed manually, 
this is noted in subsequent chapters of this document.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments