Avaya G700 Installing And Upgrading Download Page 132

Page: 132 / 808

Installing a new G700 with an S8300 using the Avaya Installation Wizard

132 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

10. Complete the following fields:

●

enter a challenge key or password

●

re-enter challenge key or password

●

force password/key change on first login

Note:

Note:

Do not lock the account or set the password to be disabled.

11. Leave the defaults in the remaining fields.

12. Click

Add

The system tells the login is added successfully.

13. If you are upgrading an LSP such that you created this super-user login on the primary

controller, do the following also on the primary controller.

a. Log in with

telnet

ssh

b. At the Linux command line, type

filesync -a

<IP_address_of_LSP>

, where

<IP_address_of_LSP>

is the IP address of the LSP you are upgrading.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 132 / 808

Search results

Summary of Contents for G700

Reviews: