Avaya G700, Installing And Upgrading, Page: 543 / 808

Before going to the customer site
Issue 10.2 May 2007 543
Upgrade the firmware on the G700 Media Gateway
●
Verifying the contents of the tftpboot directory on page 604
●
Determining which firmware to install on the G700 on page 605
●
Installing new firmware on the P330 Stack Processor on page 606
●
Installing new firmware on the G700 Media Gateway Processor on page 607
●
Installing new firmware on the media modules on page 609
●
Setting rapid spanning tree on the network on page 611
●
Installing new firmware on other G700 media gateways on page 612
Post-upgrade tasks
●
Stopping IA770 INTUITY AUDIX Messaging, if installed on page 613
●
Installing IA770 service pack (or RFU) files, if any on page 614
●
Starting IA770 INTUITY AUDIX Messaging, if installed on page 614
●
Verifying start up of IA770 INTUITY AUDIX Messaging, if installed on page 615
●
Saving translations on page 616
●
If using IA770, administering switch integration for H.323 on page 616
●
Administering IA770 (Release 1.3 or earlier) on page 616
●
Testing to verify system functionality on page 616
●
To check media modules on page 617
●
To enable scheduled maintenance on page 617
●
To busy out trunks on page 617
●
To check for translation corruption on page 617
●
To resolve alarms on page 617
●
To re-enable alarm origination on page 618
●
To back up the system on page 618
●
To restart LSPs (if any) on page 618
Before going to the customer site
The procedures in this section should be completed before going to the customer site or before
starting a remote installation.