manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 649 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 649

On-site Preparation for the Upgrade

Issue 10.2 May 2007

649

 

6. To check the status of the backup:

a. Under 

Data Backup/Restore

, click 

Backup History

. 

b. Select the backup file and click 

Check Status 

to open the 

Backup History Results

 

screen.

When the backup is finished, the 

Backup History Results

 screen displays

The final status for your backup job is shown below.

 

For each backup set, the message

BACKUP SUCCESSFUL

 

displays, if the set was backed up successfully.

7. If the AUDIX options are available, repeat Steps 3–6 for AUDIX Announcements.

Copying and installing the service pack files to the media server
(starting from R2.x only)

Note:

Note:

Do not perform this task if you are upgrading an R3.0 release to R4.0.

A pre-upgrade service pack is required to modify the server upgrade tools, including the web 
Interface and upgrade scripts, which will enable the upgrade to Communication Manager 4.0 to 
complete successfully. 

To copy pre-upgrade service pack file to the media server

1. Insert the software CD in the CD-ROM drive of your laptop.

2. On the Maintenance Web Interface, under Miscellaneous, click 

Download Files

.

3. Select the download method, “Files to download from the machine I’m using to connect to 

the server.”

Note:

Note:

Do not

 select the checkbox, “Install this file on the local server.”

4. Browse to the directory on the software CD (or laptop) that contains the pre-upgrade service 

pack file.

5. Select the pre-upgrade service pack file and click 

Download

.

To install the pre-upgrade service pack

Note:

Note:

Use a telnet session to install and activate the service pack file.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments