manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 652 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 652

Manual upgrade of an existing S8300B or S8300C and G700 to R4.0

652 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Copying the software and firmware files to the server

Normally, during an upgrade, you will have the Communication Manager Software Distribution 
CD-ROM that contains the latest software to install. The latest software for the S8300 has a file 
name that reflects the most recent load of software (

For example only

, 013-01.0.640.1). The 

latest service pack software for Communication Manager also reflects the most recent load of 
software (

for example only

, 03.1-01.0.640.0).

!

CAUTION:

CAUTION:

When you are upgrading the media server as a primary controller, you must 
check 

Latest Communication Manager Software & Firmware Compatibility 

Matrix

 for the supported upgrade paths. If you attempt to upgrade the media 

server to a release that is not supported as an upgrade path, you might corrupt 
the translations. 

Also, you must check 

Latest Communication Manager Software & Firmware 

Compatibility Matrix

 for compatibility of software loads between the primary 

controller and any LSPs or ESSs. If the software loads of the primary controller 
and the LSPs/ESSs are incompatible, then file synchronization between the 
primary controller and the LSPs/ESSs can cause translation corruption on the 
LSPs/ESSs.

To check the 

Latest Communication Manager Software & Firmware 

Compatibility Matrix

 from any computer, access 

http://support.avaya.com

. 

Select 

Downloads

 > 

Latest TN Circuit Pack, Media Server, and Media 

Gateway Firmware and Software Updates

 > 

Latest Communication Manager 

Software & Firmware Compatibility Matrix

.

These files also contain the most recent firmware for the G700 Media Gateway, the various 
media modules, and the P330 Stack Processor.

To transfer files from the software CD

1. Insert the Communication Manager software distribution CD into the CD-ROM drive.

2. Log in to the S8300 Web interface.

3. Under Server Upgrades, click 

Manage Software

.

The system displays the 

Manage Software 

screen.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments