manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 127 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 127

Install the S8300

Issue 10.2 May 2007

127

 

Note:

Note:

If you do not install IA770 concurrently with Communication Manager at this time, 
and decide later to install it, you will have to upgrade Communication Manager 
again (even to the same release), For the upgrade, you use the Manage 
Software screen on the Maintenance Web interface, and select 

Yes

 at this screen 

for IA770 installation.

At this point, the following processes are initiated:

a. The S8300 hard drive and internal Compact Flash are partitioned and reformatted.

b. The Linux operating system is installed.

c. Once the drive is properly configured, the program begins installing Communication 

Manager software and reports the progress.

Communication Manager installation progress

These processes take about 30 minutes. When the media server is ready to reboot, the CD 
drive door opens and the following screen flashes for about 5 seconds. If selected, the IA770 
software is installed along with the Communication Manager software.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments