Avaya G700 Installing And Upgrading Download Page 735

Page: 735 / 808

Upgrade the S8300

Issue 10.2 May 2007

735

10. Complete the following fields:

●

enter a challenge key or password

●

re-enter challenge key or password

●

force password/key change on first login

Note:

Note:

Do not lock the account or set the password to be disabled.

11. Leave the defaults in the remaining fields.

12. Click

Add

The system tells the login is added successfully.

13. If you are upgrading an LSP such that you created this super-user login on the primary

controller, do the following also on the primary controller.

a. Log in with

telnet

ssh

b. At the Linux command line, type

filesync -a

<IP_address_of_LSP>

, where

<IP_address_of_LSP>

is the IP address of the LSP you are upgrading.

If upgrading an LSP, synchronize translations from the primary
controller

If you are upgrading an LSP such that you created this super-user login on the primary
controller, do the following also on the primary controller.

1. Log in with

telnet

ssh

2. At the Linux command line, type

filesync -a

<IP_address_of_LSP>

, where

<IP_address_of_LSP>

is the IP address of the LSP you are upgrading.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 735 / 808

Search results

Summary of Contents for G700

Reviews: