Avaya G700, Installing And Upgrading, Page: 670 / 808

Manual upgrade of an existing S8300B or S8300C and G700 to R4.0
670 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Directory list for P300 stack processor
3. Check the version number (ver num) of the EW_Archive file to see if it matches the Release
Letter.
If not, you must upgrade the P330 stack processor.
4. Type
show image version
The system displays the list of software.
Show image version List for P330 stack processor
5. Check the version number of the stack software image file in Band B to see if it matches the
your planning document.
If not, you must upgrade the P330 stack processor.
To determine if new firmware is required for the MGP, VoIP module, and installed
media modules
1. Type
session mgp
2. At the MG-001-1(super)# prompt, type
show mg list_config
The system displays the list of software.
Show MG list_config
M# file ver num file type file location file description
-- ---- ------- ---------- ------------- ----------------
1 module-config N/A Running Conf Ram Module
Configuration
1 stack-config N/A Running Conf Ram Stack Configuration
1 EW_Archive 4.0.4 SW Web Image NV-Ram WEB Download
1 Booter_Image 3.2.5 SW BootImage NV-Ram Booter Image
Mod Module-Type Bank Version
------ ----------- ---- -------
3 Avaya G700 media gateway A 0.0.0
3 Avaya G700 media gateway B 4.0.17
SLOT TYPE CODE SUFFIX HW VINTAGE FW VINTAGE VOIP FW
---- ------ ----- ------ ---------- ---------- -------
V0 G700 DAF1 A 00 21.25.0(B) 26
V1 ICC S8300 A 00 5 N/A
V2 DCP MM712 A 2 5 N/A
V3 ANA MM711 A 3 16 N/A
V4 DS1 MM710 A 1 8 N/A