Avaya G700, Installing And Upgrading, Page: 711 / 808

On-site Preparation for the Upgrade
Issue 10.2 May 2007 711
The final status for your backup job is shown below.
For each backup set, the message
BACKUP SUCCESSFUL
displays, if the set was backed up successfully.
7. If the AUDIX options are available, repeat Steps 3–6 for AUDIX Announcements.
Recording configuration information
If you have not already done so, you must record the current server configuration data, which
will be re-entered after the upgrade.
To view and record the current configuration data
1. Launch the Maintenance Web Interface.
2. Under Server Configuration and Upgrades, click Configure Server .
3. Click Continue on the first and second screen.
4. On the Select method for configuring server screen, select Configure individual
services and click Continue .
5. Select Set Identities from the left-side navigation pane and record the host name of the
server.
6. Select Configure Interfaces and record the following:
- Server IP address
- Gateway IP address,
- Subnet mask
- Integrated Messaging IP address, if configured
You can skip the remaining configuration screens.
7. Select Close window and exit the Web pages.